IN 1

Jun 25, 2014 Sooooo. Today when I was about to start my stream, my mic suddenly stopped picking audio,after working for about ½ a year no hiccups. I've tested the microphone, and it's working just fine, so it's definitely an OBS issue, and I've tried everything I can think of:/ The mic in question is my. Since the Audio-Technica AT2020 has a Cardioid pickup pattern, it will mostly be picking up sound from the front while rejecting sound from the back and the sides. This is essential because you want to avoid picking up unwanted noises and any of the room’s natural sound, and a cardioid pattern will help with this quite a lot! Buy Audio-Technica AT2020 Limited Edition Cardioid Condenser Studio XLR Microphone. This will result in picking up a lot of ambient sound. Will this give you sound to rival, say, an RE-20, SM7B, or even a Procaster? That depends on your mixing skills, somewhat, but in general it will not.

Connect your microphone here using an XLR cable. The GAIN knob next to it controls the input level.

IN 2

Connect your guitar, bass, or synthesizer here using a 1/4 inch jack cable. The GAIN knob next to it controls the input level.

LINE / INST

Select LINE when using IN 2 with a synthesizer or any other line level source. Select INST when using a guitar or bass.

48V

Enable the 48V power supply (phantom power) for IN 1 when using a condenser microphone.

INPUT / HOST

Adjust the balance between the inputs (direct monitoring) and the sound from the computer for the headphones output.

HEADPHONES OUTPUT

Connect your headphones here. The knob above controls the headphones volume.

OUT1/2 VOLUME

At2020 Not Picking Up Sound Devices

Control the output level of the outputs on the back of the device, OUT 1 and OUT 2.

METERING AND STATUS LEDs

At2020 Not Picking Up Sound

Shows the input level of IN 1 and IN 2 as well as the status of the USB connection and the 48V phantom power.

OUT 1 AND OUT 2

Connect your stereo system or active loudspeakers here using RCA cables.

USB CONNECTOR

Connect your computer here using the provided USB cable.

SETUP CHECKLIST

Autocad 2008 keygen internal error 2. Contents

• 1 Common Troubles When OBS Not Picking up Mic And Proper Fixes

Virtually every streamer around the globe knows about OBS (Open Broadcaster Software), a free open-sourced streaming and recording program. Animal scales divinity original sin 2. Thanks to its straightforward well-organized user interface, OBS is relatively easy to use and it performs smoothly as well. That being said, users of OBS still run into a couple of software difficulties from time to time and the “OBS not picking up mic” issue is a prime example. Needless to say, with the mic offline, the performance of OBS would experience substantial disruptions.

So OBS seems to fail to pick up your mic all of a sudden and you don’t know what to do to address it? Then you have come to the right place as down below, you shall find some of the most popular solutions to the issue of “OBS not picking up mic” nowadays.

Common Troubles When OBS Not Picking up Mic And Proper Fixes

• Push-To-Talk Is On

As the name suggests, the Push-To-Talk (also known as PTT) function let people record their voice only if they hold the PTT hotkey. Hence, if you inadvertently turn on Push-To-Talk, it may look like OBS fail to pick up your mic. So to get everything back to normal, you must go to “Setting”, choose “Audio” and look out for “Enable Push-To-Talk” beside your mic. Additionally, you should go to “Hotkeys”, pick Mic/Aux” and see if the space “Push-to-talk” display any key.

For most of the time, by disabling the Push-To-Talk function, you would be able to tackle the “OBS not picking up mic” issue.

• Mic Exclusive Mode Is On

In case you don’t know, once engaged, Exclusive Mode shall prevent your mic from coming on if you use specific programs such as Skype, TeamSpeak and so on at the same time as OBS. To see if your mic is currently running in Exclusive Mode, go check its properties. To do that, right click the speaker icon in the taskbar, choose “playback devices”, pick your mic and select “Properties”. In the “Advanced” tab, you would see a checkbox next to “Allow applications to take exclusive control of this device”, uncheck it and click “OK”.

• Mic Happen To Be Muted

Obviously, your mic would not capture your voice if it’s muted at the moment. To check if your mic is muted, right click the speaker icon in the taskbar, choose “recording devices”, select your mic, hit “Properties” then head over to the “Levels” tab. Now, if the speaker icon in “Microphone” is crossed then your mic is currently muted. To get the mic back to work, you have to left click the speaker icon on time to uncross it. Now you need to head back to “recording devices”, talk a bit and see if the green bar shows up.

In the case OBS still fail to pick up mic then your mic might have some issues like loosened jacks.

If All Fail: Send A Log File To OBS Support

In the case the issue of “OBS not picking up mic” persists after everything you have done, it’s time to get assistance from professionals.

For your information, OBS creates a log file every time you run it which contains diagnostic details which allow tech support to nail the problem. In order to access the OBS log file, click “Help”, go to “Log Files” and pick “Upload Last Log File”. You would receive a link of your log file, you must give that to tech support in addition to in-depth descriptions of your setup. After that, follow the instruction of OBS tech support and you would be able to resolve your audio issue eventually.